Cedar Wash Available Sizes
Designed to remove surface resin oils and high concentrations of water-soluble wood extractives.
Product Information
Cedar Wash should be used on bare wood surfaces for prep only.
Features
- Designed specifically for Western Red Cedar and Redwood (Softwoods) and Walnut and Mahogany (Hardwoods)
- Removes resin oils and wood extractives from the surface of the wood that may interfere with adhesion of LIFELINE™ exterior stains or Prelude™ to the wood surface
- Removes dirt, dust, pollen and other foreign substances from wood surfaces
- Environmentally friendly
Application Temperature
40° to 90°F
Application Methods
Garden pump sprayerSpecial Instructions
Apply from bottom-up, rinse from top-downRinse thoroughly
Safe to use on chinking and sealants
Shelf Life
3 Years
Frequency
As neededCoverage Rate
175-225 square feet / gallonPerma-Chink Stain Calculator
Measured Square Footage
Take each wall and multiply length x height. Example 40' long x 10' high= 400 sq. ft.
Add each wall together 400 + 400 + 250 + 250 = 1300 sq. ft. Example 400 sq. ft. x 4= 1600 sq. ft.
For each of your gable ends (the triangles) use Base x Height/2
Example 30' x 15' = 450'/2 = 225 sq ft. Add all areas together.
Adjust for Type of Log
A round log has a different surface area than a flat timber. We must account for the curvature and size of the log so we don't end up short on stain. Select your log type
Maintenance Coat
Most maintenance coats are done with one coat, often clear. If you plan to add a coat of color and a clear, feel free to ask one of our specialists for some advice.
Surface Condition
Rough logs will take more stain than smooth logs. If your logs are rough, check off the box and it will calculate based on a rough surface.
Note: All calculations are estimated. Actual coverage will vary based on surface condition, species and moisture content.
Reviews
There are no reviews yet.