Deck Defense (Hybrid)
Deck Defense is the best wood stain for your decks, rails and fences. It has been engineered for better performance, longer life, and easier application. Although it is a totally waterborne product, Deck Defense has penetrating properties like oil finishes, but unlike oil-based products, it hardens into a lattice-like coating, supporting and strengthening the natural wood fibers from the inside out.
Customers can feel secure in the knowledge that their investment is protected from the natural damaging effects of sun, wind, and water. Deck Defense is easy to apply and maintain, and is ideal for coating decks, fences, railings and other horizontal surfaces. Our new deck stain is available in seven colors to complement our exterior wall finishes.
Deck Defense can be applied over older Deck Defense-stained decking provided proper application and surface preparation.
REQUEST FREE SAMPLES (click here)
Deck Defense Colors
Deck Defense Available Sizes
Deck Defense comes in 1 Gallon and 5 Gallon pails to easily complete any size of project. Color samples are available.
Product Information
Deck Defense is easy to apply and maintain, and is ideal for coating decks, fences, railings and other horizontal surfaces.
Features
- Excellent UV protection
- Long lasting color retention
- Breathable film allows decking to dry out
Application Temperature
40° to 90°F
Application Methods
Airless sprayerBrush, Roller, Application Pads
Back-brush into surface
Refer to product label for application instructions
Surface Preparation
Clean and dryFree of mold and mildew
Never use steel wool
Special Instructions
Back-brushing requiredStir container every 15 minutes
Maintain a wet edge to avoid lap marks
Avoid applying in direct sun
If desired, apply second coat while first coat is still wet
Shelf Life
3 Years
Frequency
As needed, depending on exposureDrying Time
Dry to the touch in 15 minutes; tack-free in 30 minutesWait 24 hours before returning heavy items
Coverage Rate
175-250 square feet / gallon.Perma-Chink Stain Calculator
Measured Square Footage
Take each wall and multiply length x height. Example 40' long x 10' high= 400 sq. ft.
Add each wall together 400 + 400 + 250 + 250 = 1300 sq. ft. Example 400 sq. ft. x 4= 1600 sq. ft.
For each of your gable ends (the triangles) use Base x Height/2
Example 30' x 15' = 450'/2 = 225 sq ft. Add all areas together.
Adjust for Type of Log
A round log has a different surface area than a flat timber. We must account for the curvature and size of the log so we don't end up short on stain. Select your log type
Maintenance Coat
Most maintenance coats are done with one coat, often clear. If you plan to add a coat of color and a clear, feel free to ask one of our specialists for some advice.
Surface Condition
Rough logs will take more stain than smooth logs. If your logs are rough, check off the box and it will calculate based on a rough surface.
Note: All calculations are estimated. Actual coverage will vary based on surface condition, species and moisture content.
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Size | 5 Gallon ,1 Gallon ,Free Sample |
| Color | Gentry Gray 1942 ,Barn Gray 1972 ,Harvest Wheat 1920 ,Honey Maple 1930 ,Redwood 1940 ,Hickory 1950 ,Weathered Gray 1960 |
| Brand | Perma-Chink |
Reviews
There are no reviews yet.