Lifeline Acrylic Options
Lifeline Acrylic Available Sizes
Lifeline Acrylic comes in 5-gallon pails and 1-gallon pails. Free samples of all our finishes are available.
Clear Interior Wood Finish
Lifeline Acrylic can be applied onto Lifeline Interior or Prelude or directly over bare wood.
Features
- Will not Yellow
- Fast Drying
- Low VOCs
Application Temperature
40° to 90°F
Application Methods
Airless sprayerBrush
Sponge
Surface Preparation
Clean and dryFree of mold and mildew
Never use steel wool
Special Instructions
One to multiple coats depending on the desired film thicknessShelf Life
3 Years
Frequency
One-time applicationDrying Time
Dry to the touch in 1 hourMay be sanded in 4 hours
Coverage Rate
350-450 square feet / gallon on bare wood (1st coat)600-800 square feet / gallon on finished wood (2nd coat)
700-900 square feet / gallon for subsequent coats
Perma-Chink Stain Calculator
Measured Square Footage
Take each wall and multiply length x height. Example 40' long x 10' high= 400 sq. ft.
Add each wall together 400 + 400 + 250 + 250 = 1300 sq. ft. Example 400 sq. ft. x 4= 1600 sq. ft.
For each of your gable ends (the triangles) use Base x Height/2
Example 30' x 15' = 450'/2 = 225 sq ft. Add all areas together.
Adjust for Type of Log
A round log has a different surface area than a flat timber. We must account for the curvature and size of the log so we don't end up short on stain. Select your log type
Maintenance Coat
Most maintenance coats are done with one coat, often clear. If you plan to add a coat of color and a clear, feel free to ask one of our specialists for some advice.
Surface Condition
Rough logs will take more stain than smooth logs. If your logs are rough, check off the box and it will calculate based on a rough surface.
Note: All calculations are estimated. Actual coverage will vary based on surface condition, species and moisture content.
Reviews
There are no reviews yet.