Log Wash Available Sizes
Log Wash comes in 1 Gallon concentrated jugs for easy use.
Product Information
Log Wash does not upset the natural pH balance of the wood, thus preventing wood fiber damage and iron tannate stains.
Features
- Gently Cleans Bare and Finished Wood
- Safe for Log Chinking and Sealants
- Environmentally Friendly
- Removes Dust, Pollen, Dust, Pollution
Application Temperature
40° to 90°F
Application Methods
Garden pump sprayer
Special Instructions
Apply from bottom-up, rinse from top-down
Rinse thoroughly
Shelf Life
3 Years
Coverage Rate
Cleaner Strength- Makes 16 gallons of solution @ 1 cup / gallon water= 2400-4000 sq ft per 1 Gallon of Concentrate
Preparation Strengths- Makes 8 gallons of solution @ 2 cups / gallon water= 1200-2000 sq ft per 1 Gallon of Concentrate
Application Rate= 150-200 sq.ft. / Gallon of diluted Log Wash solution
Perma-Chink Stain Calculator
Measured Square Footage
Take each wall and multiply length x height. Example 40' long x 10' high= 400 sq. ft.
Add each wall together 400 + 400 + 250 + 250 = 1300 sq. ft. Example 400 sq. ft. x 4= 1600 sq. ft.
For each of your gable ends (the triangles) use Base x Height/2
Example 30' x 15' = 450'/2 = 225 sq ft. Add all areas together.
Adjust for Type of Log
A round log has a different surface area than a flat timber. We must account for the curvature and size of the log so we don't end up short on stain. Select your log type
Maintenance Coat
Most maintenance coats are done with one coat, often clear. If you plan to add a coat of color and a clear, feel free to ask one of our specialists for some advice.
Surface Condition
Rough logs will take more stain than smooth logs. If your logs are rough, check off the box and it will calculate based on a rough surface.
Note: All calculations are estimated. Actual coverage will vary based on surface condition, species and moisture content.
Reviews
There are no reviews yet.