Oxcon Available Sizes
Apply a liberal amount to the wood, let it work on the surface for 10 to 15 minutes and rinse it thoroughly with clean water.
Product Information
Oxcon should not be used for spot cleaning since it may cause blotching of the surface.
Features
- Convenient 4-to-1 Concentrate
- Eliminates “Iron Stains”
Application Temperature
40° to 90°F
Application Methods
Garden pump sprayerSpecial Instructions
Apply from bottom-up, rinse from top-downRinse thoroughly and completely
Do not allow to freeze
Shelf Life
1 Year
Frequency
As neededSurface Preparation
Clean and mold freeCoverage Rate
1000-2000 square feet / gallonPerma-Chink Stain Calculator
Measured Square Footage
Take each wall and multiply length x height. Example 40' long x 10' high= 400 sq. ft.
Add each wall together 400 + 400 + 250 + 250 = 1300 sq. ft. Example 400 sq. ft. x 4= 1600 sq. ft.
For each of your gable ends (the triangles) use Base x Height/2
Example 30' x 15' = 450'/2 = 225 sq ft. Add all areas together.
Adjust for Type of Log
A round log has a different surface area than a flat timber. We must account for the curvature and size of the log so we don't end up short on stain. Select your log type
Maintenance Coat
Most maintenance coats are done with one coat, often clear. If you plan to add a coat of color and a clear, feel free to ask one of our specialists for some advice.
Surface Condition
Rough logs will take more stain than smooth logs. If your logs are rough, check off the box and it will calculate based on a rough surface.
Note: All calculations are estimated. Actual coverage will vary based on surface condition, species and moisture content.
Reviews
There are no reviews yet.