StripIt Available Sizes
With the use of all finish removers and wood cleaners, it is of utmost importance to thoroughly rinse the surface once the finish is removed.
Product Information
StripIt removes multiple layers of log home finishes in one application.
Features
- Removes most finishes from logs, siding and deck surfaces
- Will not harm chinking and sealants
- Will not corrode or discolor aluminum or other metals
- Environmentally friendly
Application Temperature
40° to 90°F
Application Methods
Safety equipment, bucket, brush or roller, paint scraper, rags, and pressure washer capable of generating at least 500 to 600 psiSurface Preparation
Dirt FreeShelf Life
2 Years – Protect from freezing
Special Instructions
Apply from bottom-up, rinse from top-downOne to two applications, depending on severity
Rinse thoroughly from top down
Coverage Rate
45-55 square feet / gallonPerma-Chink Stain Calculator
Measured Square Footage
Take each wall and multiply length x height. Example 40' long x 10' high= 400 sq. ft.
Add each wall together 400 + 400 + 250 + 250 = 1300 sq. ft. Example 400 sq. ft. x 4= 1600 sq. ft.
For each of your gable ends (the triangles) use Base x Height/2
Example 30' x 15' = 450'/2 = 225 sq ft. Add all areas together.
Adjust for Type of Log
A round log has a different surface area than a flat timber. We must account for the curvature and size of the log so we don't end up short on stain. Select your log type
Maintenance Coat
Most maintenance coats are done with one coat, often clear. If you plan to add a coat of color and a clear, feel free to ask one of our specialists for some advice.
Surface Condition
Rough logs will take more stain than smooth logs. If your logs are rough, check off the box and it will calculate based on a rough surface.
Note: All calculations are estimated. Actual coverage will vary based on surface condition, species and moisture content.
Reviews
There are no reviews yet.