Lifeline Advance Options
Lifeline Advance Available Sizes
Lifeline Advance comes in 5-gallon pails and 1-gallon pails. Free samples of all our finishes are available.
Exterior Top Coat
Lifeline Advance works just like the clear-coat on your car to protect the color coat underneath.
Features
- Mold and mildew protection
- Non-yellowing
- Low VOCs
Application Temperature
40° to 90°F
Application Methods
Airless sprayerBrush
Back-brushing required
Surface Preparation
Clean and dryFree of mold and mildew
Never use steel wool
Special Instructions
Stir container every 15 minutesAvoid applying in direct sun
Shelf Life
3 Years
Frequency
1 coat over Lifeline Exterior, Ultra-2, or Ultra-7 stains1 coat 24-36 months later, then only as required
Drying Time
Dry to the touch in 2-4 hoursCures in 72 hours
Coverage Rate
600-800 square feet / gallon on smooth surfaces500-700 square feet / gallon on rough surfaces
Perma-Chink Stain Calculator
Measured Square Footage
Take each wall and multiply length x height. Example 40' long x 10' high= 400 sq. ft.
Add each wall together 400 + 400 + 250 + 250 = 1300 sq. ft. Example 400 sq. ft. x 4= 1600 sq. ft.
For each of your gable ends (the triangles) use Base x Height/2
Example 30' x 15' = 450'/2 = 225 sq ft. Add all areas together.
Adjust for Type of Log
A round log has a different surface area than a flat timber. We must account for the curvature and size of the log so we don't end up short on stain. Select your log type
Maintenance Coat
Most maintenance coats are done with one coat, often clear. If you plan to add a coat of color and a clear, feel free to ask one of our specialists for some advice.
Surface Condition
Rough logs will take more stain than smooth logs. If your logs are rough, check off the box and it will calculate based on a rough surface.
Note: All calculations are estimated. Actual coverage will vary based on surface condition, species and moisture content.
Reviews
There are no reviews yet.